- Description
-
Details
The RTC1 model is a full analogue Compressor-Limiter. In the RTC1, peak limiting is accomplished by making use of an FET as a voltage variable resistor. A unique circuit enables severe limiting without added distortion, and the compression ratio may be optimized for various program materials. The electronic output stage uses two 6922-6DJ8-ECC88 triodes in special configuration. Each triode takes care of the preamplification of the HOT and COLD balanced signal with an audio output of + 10dB and with a harmonic distortion of less than 3%. The internal circuits are made with highly selected original components to ensure the characteristic sound of the late 60's.
Specifications:
-Input: Balanced bridging, differential amplifier. -Output: Balanced +10dB XLR, Balanced and Unbalanced +10dB Jack
Fully Triode 6922-6DJ8-ECC88 output signal-Input impedance: 20 KOhm, used as balanced input,
10 KOhm used as unbalanced ( single ended) input.-Maximum input level: +20dB maximum (Ref. 0.775 Volts RMS). -Maximum Gain: 45 dB, +/- 1 dB. -Frequency response: +/- 1 dB, 20-20000Hz. -Output load: 150 Ohm or greater. -Maximum output level: +25 dBm into 600 Ohm load (12.28 Volts). -Distortion: Less than 0.5% THD, 50 Hz to 15 KHz with limiting,
at 1,1 seconds release setting; (as with all limiting devices, distortion
of low frequency peaks increases with
faster release time).-Signal to noise ratio: Greater than 81 at threshold of limiting, 30 Hz to 15 KHz. -Attack time: Less than 20 microseconds for 100% recovery;
adjustable to 800 microseconds with
front panel control.-Release time: 50 milliseconds minimum, 1.1 seconds
maximum (for 63% recovery). Adjustable
with front panel control.-Threshold vs. output level: Compression ratio setting: Input level at minimum
limiting threshold +/- 20dB :Relative output at threshold: 20:1 -24 dB +10 dBm 12:1 -25 dB +9 dBm 8:1 -26 dB +8 dBm 4:1 -30 dB +7 dBm -Power requirements: 220 - 250 VAC 50/60Hz - For EU market -Environment: Operating, 0°C to +50°C
Storage, -20°C to +60°C
Dimensions
Fits: 2U EIA 19" Rack
Size: 19" X 3.5" X 12" Deep
Size (Boxed for Shipping): 21" X 9" X 15"
Actual Weight: 10.23 lbs
Shipping Weight: 13.74 lbsDOWNLOADS:
Declaration of Conformity - Additional Information
-
Additional Information
SKU 1402021-13012021-02-UE Weight 4.5000 - Reviews
-
